European Biosolids and Organic Resources Conference - Stockpiles
Rajapaksha; N.S.S.; Gedara; S.; Mansfield; H. and Startin; C.
NATURAL COVERS: IS IT A VIABLE SOLUTION TO MANAGE BIOSOLIDS TEMPORARY STOCKPILES?
Rajapaksha, N.S.S.1, Gedara, S.1, Mansfield, H.1 and Startin, C.1
1 Environmental Services, Wastewater Wholesale, United Utilities, Lingley Mere, Great Sankey, Warrington, UK, WA5 3LP.
Corresponding author: (Nalika.Rajapaksha@uuplc.co.uk; +441925 674238)
Agriculture recycling of Biosolids is recognised as the Best Practicable Environmental Option for sludge management in most situations. However, field stockpile management over the rainy winter months is challenging since most digested Biosolids are vulnerable to wet weather. Such stockpiles may cause risks to the environment and impose an extra cost to sludge producer in addition to the reputational damage. The aim of this study was to investigate the possibility of using natural covers to manage the stability of Biosolids stockpiles. Preliminary field trials were conducted using straw and live-grass covers. Initial finding reveals that the Biosolids stockpiles with live-grass cover tend to retain the stability during severe winter periods. This study suggests that natural covers could be a practical, efficient and economical technique for Biosolids stockpile management. However, further studies are recommended to identify suitable grass varieties for live covers, other potential natural cover materials and possible post-spreading issues.
Keywords: Agriculture Recycling, Biosolids, Live covers, Natural Covers, Stockpile Stability
The UK produces approximately 1.4 million tonnes (Dry Solids) of sewage sludge per annum with volumes increasing annually. Currently 80% of the total production goes to agricultural recycling after suitable treatment while rest is mainly disposed through incineration and landfill (OFWAT 2015). Treated sewage sludge (Biosolids) which contain plant nutrients and organic matter has been recycled to agricultural land around the world for many decades.
Agriculture recycling of Biosolids is recognised as the Best Practicable Environmental Option (BPEO) in most circumstances and supported by the UK government and European Commission. However, Biosolids recycling process poses various environmental and technical challenges in addition to the social and economic pressures faced by Biosolids undertakers. One of the important logistical aspects of Biosolids recycling is safe stockpiling.
EU/UK regulations allows Biosolids to be stockpiled on the same field location up to 12 months, in practice, it is kept to a minimum. However, Biosolids stockpile management over the rainy winter months is always challenging. The stockpile stability is broadly determined by;
- Having a Biosolids product “fit for the purpose”,
- Selection of appropriate stockpile location, and
- Employing appropriate stockpiling technique.
Having a Biosolids product “fit for the purpose”
Some Biosolids products are more vulnerable to collapse than others in the wet weather (Figure 1). Practical experience and observations suggest that the product quality required for safe stockpiling could be influenced by sludge treatment process (e.g. Digested/Lime treatment), dewatering techniques used (e.g. Centrifuge, Press, Polymer types and use etc.), product handling techniques (e.g. Belt conveyor system, double handling etc.), Biosolids on-site storage (e.g. Silo storage, double handling etc.). However, product related factors influencing the Biosolids stackability and “resistance to collapse” needed to be further investigated.
Figure 1: Collapsed Biosolids stockpile in 2012 wet weather.
Selection of appropriate stockpile location
Biosolids stockpile locations are often subjected to detailed risk assessments prior to the selection and mainly determined by the vehicle and machinery access. Biosolids stockpiles on impermeable surfaces for relatively longer period in rainy weather tends to collapse quicker compared to the stockpiles on farm fields. This is mainly due to higher amounts of surface water getting into the stockpile and low levels of leaching out from the stockpile. Selection of the most appropriate location could minimise run- off water and ground water getting into the stockpile.
Employing appropriate stockpiling techniques
Observations suggest that Biosolids stockpiled in windrows stand better in wet weather than bulk stockpiles although windrowing is not always practical as it requires a comparatively larger footprint and greater field access. Profiling the stockpiles into distinct cone or pyramid shapes could encourage rain water that drop on the stockpile to be run-off over the surface of the stockpile. Relatively smaller stockpiles (around 300 tonnes) retain their internal structure better hence tend to stand longer in wet weather compared to bigger stockpiles.
Process of stockpile collapse
Once placed, stockpiles could receive water from multiple sources (figure 2) which could reduce the overall dry solids contents of Biosolids. Not all water received by the stockpile get absorbed by the Biosolids, some water could flow over the stockpile surface, and some could leach out while some water get evaporated. Over the course of the stockpiling duration, this cycle continues. However, the net rate of water take up by the stockpile determines whether it is going to collapse or withstand the weather conditions.
Rain water that gets absorbed by the surface layer of the stockpile tends to deteriorate and run over the relatively dry sub-surface, very much like a “Lava Flow”. This process opens up more and more area of the stockpile to receive rain water which make the stockpile displacement faster until whole structure collapses.
Figure 2: Water in and out from Biosolids stockpile
Evidence of climate change affecting weather system is prominent; prolonged and extreme weather (e.g. high rain fall, flooding etc.) events are common. Since, future circumstances are uncertain, the UK government is seeking the support from businesses for risk management and resilience planning (Defra, 2013). For Biosolids undertakers, process improvements and new techniques into Biosolids product and stockpile resilience to withstand the changing weather system are now more important than ever before.
Stockpile Management Techniques
Currently various techniques and materials are used to protect and contain temporary Biosolids stockpiles. Bunds made out of straw bales or compost/farm yard manure are widely used materials while reusable stockpile covers are also emerging in the market. Each individual technique has its own advantages and disadvantages.
a) Impermeable Covers
Simple polythene covers (silage sheets) to different types of durable and flexible sheets (Evans 2006; 2014) are emerging in the markets. These impermeable covers are ideal to maintain sludge quality
intact while avoiding potential environmental impacts. However, placing such impermeable covers over the stockpile and anchoring could be challenging and may require weights (sand bags, water etc.), machinery and labour. Durable plastic covers could be relatively expensive. However, if handled with care, they could be re-used multiple times. Usually these covers get contaminated with Biosolids once covered and may require cleaning before reuse. Disposal of such contaminated covers could also be expensive.
In this technique, liquid copolymer which is widely used for erosion control and dust suppression is sprayed over the stockpiles to form a light surface crust. According to the manufacturer, increased applications of Gorilla-Snot can be more effective since it does not wash away in the rain and does not re-emulsify with water. The product is designed to penetrate into the ground creating a strong and flexible surface that can withstand the intense environmental conditions (SOILWORKS, 2016). The manufacturer claims that this technique is eco-safe and biodegradable. However, it needs curing once spread and further investigation is required to establish applicability and cost of how it would work on Biosolids. Some trials with Gorilla-Snot are ongoing in the UK conditions with feedback expected in the next few months.
c) Straw Bunds
Constructing a wall with large straw bales helps to contain sloppy stockpiles to minimise potential pollution risks (see figure 3). Straw bunds do not avoid further product deterioration since it does not prevent receiving of rain water fall onto the stockpile. However, straw bund wall can filter-out some excess water. Generally, it needs around 20 bales for 300 – 400 tonnes which can cost £3.50 – £4.90 per tonne depending on stockpile size, product quality, location, receptor risks etc. Disposal of the contaminated bales could be an issue. Furthermore, the Biosolids undertaker have to be extremely precautious when sourcing straw bales because these should be free from seeds of arable weeds such as herbicide-resistant blackgrass (Evans 2006). This technique is expensive in labour and materials and mostly used as the last resort.
Figure 3: Straw bund constructed around a collapse Biosolids stockpile
Existing stockpile management techniques and the material used have pros and cons in terms of their effectiveness, practicality and the cost. Biosolids undertakers have to choose the appropriate stockpile management technique based on their circumstances. However, having more options can only be beneficial for the industry. The use of natural covers could be an effective option for stockpile management.
Introduction to Live Covers
Inspired by nature (Figure 4), establishing a live vegetation over Biosolids stockpiles using grass (e.g. Rye-grass) or selected crop varieties (e.g. Winter Wheat) could help to retain the stability of the stockpile. Cover vegetation can not only could reduce rain water getting into the stockpiles but also could get rid of some water in the form of evapotranspiration. Furthermore, the root system can help to form a surface crust over the stockpiles giving some structure.
Figure 4: Natural grass growth holds the previously collapsed digested Biosolids stockpile
The aim of this study was to investigate the possibility of using live grass covers to maintain the stability of Biosolids stockpiles. The preliminary trial started with Digested Biosolids (25% dry solid). Initial stockpile was delivered in October 2013 and contained 110 tonnes heaped in windrow. In Feb 2014, part of the stockpile was sown with grass seeds (Rye-grass - Lolium multiflorum) while keeping rest of the stockpile with no cover. At the time of the sowing, the weather remained cold and wet but the stockpile seems to be stable. In this trial, grass seed was hand sown.
Two week following the sowing, despite to the cold weather, grass started to appear and it took four weeks to grow into a substantial cover. The residual biological activities taken place in stockpile tend to raise the temperature which helps to germinate the grass seeds even in colder weather. Subsequently, due to the extremely wet weather, part of the stockpile collapsed (Figure 5) in April 2014 while the part with the “Live Cover” remained stable.
Figure 5: Part of the Biosolids stockpile without the “Live Cover” collapsed
“Live Cover” could help the stockpile stability in many ways. The overgrowth would act as a cover in reducing the rain water getting into the stockpile and the evapotranspiration (evaporation from the surface of the pile and transpiration from the grass cover) would remove rain water that has penetrated the stockpile, from deep inside reached by its root system. Further, the root system tends to hold the surface layer of the stockpile (Figure 6) forming a “crust” which gives some physical stability while suppressing the odour. “Live Cover” would improve the appearance of a stockpile (better aesthetics) and could help to trap nutrients, especially readily available Nitrogen, reducing potential nutrient losses. Hence, it could be an effective technique for wet summer stockpile management. The cost associated with this techniques is low and estimated to be £0.35 – £0.45 per tonne based on the preliminary trials.
Figure 6: “Live Cover” established on stockpile - Grass roots hold the surface
Introduction to straw covers
Straw cover over Biosolids stockpiles could cut down some of the rain water getting to the stockpile. Further, straw cover could form a surface structure to the stockpiles giving some stability. Above factors could help the stockpiles to withstand prolong rainfall events that could trigger stockpile collapse. Previous attempts to slow down sloppy cake displacements suggested that straw cover tends to roll up with collapsing stockpile edges forming a fairly strong straw bund (Figure 7), which helps to slow down the displacement of the stockpile.
Figure 7: Collapsing stockpile edges forms a fairly strong straw bund
Straw tends to provide a stiffening effect for wet sloppy sludge (Figure 8) which can slowdown the “Lava Flow” and also improves the spreadability of such deteriorated Biosolids products.
Figure 8: Stiffening effect of straw on sloppy Biosolids
The permeability of the straw cover means that it would let some rain water getting into the Biosolids. Subsequently, surface straw cover can hinder the water evaporation from the Biosolids under the cover. As stated before, Biosolids undertakers have to be extremely precautious when sourcing straw for covers in the sense of weeds such as herbicide-resistant blackgrass.
The aim of this study was to understand the logistics of establishing straw covers and impact of straw covers on Biosolids stockpiles. In 2016, two digested dewatered (25% dry solids) Biosolids stockpiles (approx. 300 tonnes each) were placed side by side on fairly flat field. One of the stockpiles were covered with straw about 30cm thick (Figure 9) using straw blower while the other stockpile left with no cover as the control. Dry solids content of the stockpiles, both on the surface and sub-surface (25 cm from top) was measured weekly.
Figure 9: Straw cover trial setup on field
Straw covers provides certainly better aesthetics compared to bare stockpiles and suppress odour. The preliminary trial suggest that the cost associated with this technique is £0.50 – £1.00 per tonne based on size of the stockpile.
Sludge analysis has shown that the percentage dry solids on the surface of the stockpile with no cover tends to fluctuate considerably while on the sub-surface tends to stay fairly constant. On the surface of the straw covered stockpile, fluctuations of the dry solids content was comparatively low although it indicated a rise during the first month. However, on the second month, dry solids content of the straw covered surface remained static whilst the bare stockpile gain more dry solids due to the evaporation (Figure 10).
Figure 10: Straw cover trial – dry solids (DS %) variation over period of two months
Preliminary results do not indicate a distinct positive impact of straw covers in maintaining the dry solids content although it does not show any noticeable negative impacts. However, at the end of the trials, stockpile with no cover shows some signs of surface collapse and sloppy areas (Figure 11), although the rainfall was not heavy and long enough to collapse any of the stockpiles. No differences were experienced on product spreadability.
Figure 11: Signs of surface collapse and sloppy area on bare stockpile
Each stockpile management techniques has advantages and disadvantages. Best stockpile management method is situational and Biosolids undertaker must select the best for individual scenario. This study suggests that natural covers; both live grass cover and straw cover could be one of the most effective and economical techniques for Biosolids temporary stockpile management. However, further studies are recommended to explore these techniques in detail.
Areas for further investigation
Grass/crop varieties that germinate rapidly even in cold wet weather and produce deep root systems need to be identified. It is also necessary to establish some full scale trials to identify the effectiveness of live covers on different stockpiles sizes. Further, different seed sowing methods should be tested to establish the most cost-effective and practical method. Optimum seed sowing rates need to be identified to establish even cover on stockpiles with different tonnages. Impact on spreading and potential post- spreading issues of “Live Cover” should be investigated. Further, “Live Covers” could potentially become a “weed” for growing crops following the spreading, hence it is essential to identify this impact on arable grounds and potential solutions (e.g. select annual varieties for live cover, spray-off the live cover prior to spreading etc.).
Further studies are required to understand the optimum straw cover thickness for cost-effective outcome. Also, a detailed literature study is needed to identify other potential natural cover materials for Biosoilds stockpile management purposes.
Authors would like to thank farm owners and the contractor (CJ and JM Huyton) who provided the practical assistant for this work. Also, the technical support provided by the Biosolids Recycling team at United Utilities is greatly acknowledged.
Defra (2013) The National Adaptation Programme Making the country resilient to a changing climate, The Stationary Office, London, UK
Evans, T. (2006) Apparatus and method for preserving material [online]. http://www.google.co.uk/patents/US20060010783 [accessed 05 September 2016]
Evans, T. (2014) Quality Biosolids recycling – winter stockpiling without risking prosecution, 19th European Biosolids and Organic resources Conference, 17 – 19 November 2015, Manchester.
OFWAT (2015) Water 2020. Regulatory framework for wholesale market and the 2019 price Review. OFWAT, UK
SOILWORKS (2016) Soil Stabilization and Dust control; Gorilla-Snot [online]. http://www.soilworks.com/products-and-services/gorilla-snot.aspx [accessed 05 September 2016]